×

PC Control These demos and projects allow the robot to be controlled via a computer.

ArbotiX Commander Control - These demos and projects control the Robot using the ArbotiX Commander, the handheld Arduino based remote control.

Direct Control - These demos and projects control the Robot directly from sensors connected directly to the Robot's control board.

Pose Control - These demos and projects allow you to create and playback a sequence of poses.

Serial Control - These demos and projects control the robot using a serial packet protocol.

Standalone - These demos and projects are deisgned to let your robot function without a computer or additional microcontroller.

Wireless Control - These demos and projects allow you to control the robot wirelessly - usually by replacing the Serial Connection with XBee modules.

Reference - These articles have technical details regarding the control and operation of the robot.

×

More info here

RFIDuino Projects

  • RFID Flash Cards

    Garage Door Opener
    mt_ignore
    Standalone
    mt_ignore
    PC Control

    Want a fancy way to learn with your kids or study for the big test? With an RFIDuino shield, a stack of flash cards and a bunch of RFID tags, you can make a flash card system that gives feedback and reinforcement to the studying process!

    Read More
  • RFID Door Lock

    Garage Door Opener
    mt_ignore
    Standalone
    mt_ignore
    PC Control (Setup Only)

    In this tutorial, we will set up a door latch that can be opened with the swipe of an RFID Tag! We will program a list of acceptable 'key' cards that will unlatch the door for a specified amount of time. This is a really simple project, but it does require that you alter your door jamb, so be prepared to do some wood work if you the strike plate to fit securely and flush.

    Read More
  • RFID Logger

    mt_ignore
    PC Control

    In this tutorial we will use the RFIDuino Logger Program to log basic data from the RFIDuino/Geekduino.

    Read More
  • RFIDuino Garage Door Opener

    Garage Door Opener
    mt_ignore
    Standalone
    mt_ignore
    PC Control (Setup Only)

    In this project, we will be using the power of RFID to tap into your garage door opening system. We are going to bridge a connection in the opener switch via a RobotGeek Relay board, initiating the door opening as if you had pressed the button. This code will work for any digital output device (such as Relays, LEDs, buzzers and more.) Activating a solenoid or motor upon a read of the 'key' tag is the basic principal behind RFID enabled locks.

    Read More
  • RFIDuino Windows Login

    mt_ignore
    Wireless(Optional)
    mt_ignore
    Serial Control
    mt_ignore
    PC Control

    The RFIDuino Login Project for Windows will allow you to use the RFIDuino system to log into Windows. You will need to load a special firmware onto your Geekduino/Arduino, and load the appropriate files onto your computer. Once setup, you can login to your computer from the main Windows Login screen by simply swiping your RFID tag across the RFIDuino antenna.

    This project will work with Windows Vista, 7, 8 and 10.

    Read More
  • RFIDuino Lock Box Getting Started Guide

    mt_ignore
    Standalone
    mt_ignore
    PC Control (Setup Only)

    The RFID Lock Box combines Arduino, RFID and a Solenoid to make your very own personal safe! The Lock Box will only open to Key Cards that you've programmed into the system, locking everyone else out!

    This guide will show you how setup the electronics for and assemble your RFIDuino Lock Box. You will start of by setting up and programming the Geekduino microcontroller. You will then be able to test your electronics, and then move onto assembling your Lock Box Kit.

    Read More

Feedback Form


Search