×

PC Control These demos and projects allow the robot to be controlled via a computer.

ArbotiX Commander Control - These demos and projects control the Robot using the ArbotiX Commander, the handheld Arduino based remote control.

Direct Control - These demos and projects control the Robot directly from sensors connected directly to the Robot's control board.

Pose Control - These demos and projects allow you to create and playback a sequence of poses.

Serial Control - These demos and projects control the robot using a serial packet protocol.

Standalone - These demos and projects are deisgned to let your robot function without a computer or additional microcontroller.

Wireless Control - These demos and projects allow you to control the robot wirelessly - usually by replacing the Serial Connection with XBee modules.

Reference - These articles have technical details regarding the control and operation of the robot.

×

More info here

Geekduino Projects

  • Automatic Plant Watering

    Automatic Plant Watering
    mt_ignore
    Standalone

    Have trouble remembering to water those tomatoes? Want to go on vacation but fear the worst for your container garden if you do? Fear no more with an automatic plant watering system! With a little bit of preparation and arduino on your side, you can make a system that will make sure your plants are watered right, giving you freedom to tend to whatever you need to while still producing those healthy tomatoes.

    Read More
  • Glitch Synth

    Glitch Synth
    mt_ignore
    Standalone

    Every now and then, we find some cool stuff that we just absolutely have to try for ourselves. We found some work done by reddit user Nugetteero in this thread, which is comprised of some messy (but awesome and functional) code, and some components on a breadboard powered by an Arduino Nano. We love it, and we're surrounded by components that can be used to make it, so obviously we had to. Here's our version.

    Read More
  • RFID Door Lock

    Garage Door Opener
    mt_ignore
    Standalone
    mt_ignore
    PC Control (Setup Only)

    In this tutorial, we will set up a door latch that can be opened with the swipe of an RFID Tag! We will program a list of acceptable 'key' cards that will unlatch the door for a specified amount of time. This is a really simple project, but it does require that you alter your door jamb, so be prepared to do some wood work if you the strike plate to fit securely and flush.

    Read More
  • RFIDuino Garage Door Opener

    Garage Door Opener
    mt_ignore
    Standalone
    mt_ignore
    PC Control (Setup Only)

    In this project, we will be using the power of RFID to tap into your garage door opening system. We are going to bridge a connection in the opener switch via a RobotGeek Relay board, initiating the door opening as if you had pressed the button. This code will work for any digital output device (such as Relays, LEDs, buzzers and more.) Activating a solenoid or motor upon a read of the 'key' tag is the basic principal behind RFID enabled locks.

    Read More
  • Arduino Pump Tutorial - Sump Pump Project

    mt_ignore
    Standalone
    This Arduino Pump Tutorial shows an example of how to use a float switch, Powertail, and pump to create a sump pump system. When you want to operate larger pumps from an Arduino you need a stronger relay to handle the larger voltage and current. The PowerSwitch Tail is a perfect tool for the job. It incorporates the relay and outlet plugs all into one unit making it easy to turn on and off larger motors, fans, and pumps.

    We also recommend checking out these other Arduino Pump Tutorials:
    Arduino ShotBot Project
    Arduino Pump Tutorial - Aquarium Auto Refill

    Read More
  • Motion Sensor Nightlight

    mt_ignore
    Standalone
    mt_ignore
    Direct Control
    This project demonstrates how to make a nightlight by using a motion sensor and Powertail Switch to turn on a 120V light. Read More
  • RobotGeek LCD - Catch the Hearts Game

    mt_ignore
    Standalone
    mt_ignore
    Direct Control
    This project demonstrates a how to make a quick game on the RobotGeek LCD. Read More
  • M74DP Airsoft Gun Mounting Kit Assembly Guide



    Read More
  • Desktop RoboTurret - LazerDazer

    LazerDazer
    mt_ignore
    Standalone

    This project is a great distraction for cats and people alike! Make your RoboTurret activate a laser and randomly move about! Cats just want to straight up do a murder on that little red laser dot. Hunting is great exercise for cats, and it's always amusing to watch them go on the attack! Sure you can just grab your laser pointer and go for it, but you always know where the laser is going to be. Let's inject a little chaos into the mix with a pan/tilt turret to make a laser that moves to random positions at random intervals!

    Read More
  • RFIDuino Lock Box Getting Started Guide

    mt_ignore
    Standalone
    mt_ignore
    PC Control (Setup Only)

    The RFID Lock Box combines Arduino, RFID and a Solenoid to make your very own personal safe! The Lock Box will only open to Key Cards that you've programmed into the system, locking everyone else out!

    This guide will show you how setup the electronics for and assemble your RFIDuino Lock Box. You will start of by setting up and programming the Geekduino microcontroller. You will then be able to test your electronics, and then move onto assembling your Lock Box Kit.

    Read More

Feedback Form


Search