×

PC Control These demos and projects allow the robot to be controlled via a computer.

ArbotiX Commander Control - These demos and projects control the Robot using the ArbotiX Commander, the handheld Arduino based remote control.

Direct Control - These demos and projects control the Robot directly from sensors connected directly to the Robot's control board.

Pose Control - These demos and projects allow you to create and playback a sequence of poses.

Serial Control - These demos and projects control the robot using a serial packet protocol.

Standalone - These demos and projects are deisgned to let your robot function without a computer or additional microcontroller.

Wireless Control - These demos and projects allow you to control the robot wirelessly - usually by replacing the Serial Connection with XBee modules.

Reference - These articles have technical details regarding the control and operation of the robot.

×

More info here

Geekduino Demos

  • Floor Mat Switch Demo

    mt_ignore
    Direct Control
    mt_ignore
    Standalone
    The following demo shows how to use a floor mat switch to trigger different outputs on an Arduino. Read More
  • Arduino Linear Actuator Tutorial - Manual Button Control

    mt_ignore
    Direct Control

    This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons. The first button extends the actuator and the second retracts the actuator.

    Large linear actuators traditionally have five wires. Two wires are for powering the motor and three wires go the internal potentiometer for reading position. The two relays are used to toggle the positive and negative power to the motor in order to determine the direction of piston travel. The analog potentiometer is wired to one of the analog inputs on the sensor shield for reading the current position. For this project we do have the analog wired up, but we are not using the analog input in the body of the code since we are just doing simple control of driving the piston in or out.

    Read More
  • Arduino Solenoid Tutorial - Buttons Demo

    mt_ignore
    Direct Control

    This Arduino Solenoid Tutorial shows how to control a solenoid using pushbuttons and a relay with your Arduino compatible controller. Solenoids are electromagnetically driven actuators. When voltage is applied to the solenoid coil the electromagnetic force pulls the center plunger in. It is an excellent mechanical solution for all kinds of DIY projects requiring short quick linear actuation. Solenoids are most often found in latching and trigger-like mechanisms, such as door locking systems, paintball guns, pinball machines, dot matrix printers, and fuel injectors. Let's get started.



    Read More

Feedback Form


Search