RobotGeek Pan & Tilt Demo - Direct Control

pantiltdirect500.jpg
mt_ignore
Standalone
mt_ignore
Direct Control
This project demonstrates how to do direct control of the RobotGeek Pan & Tilt Kit using two sensors.


Project Parts List:

Wiring:

Device Sensor Shield Port
Pan Servo Digital Pin 9 (White stripe is signal)
Tilt Servo Digital Pin 10 (White stripe is signal)
RobotGeek Knob Analog Input 0
RobotGeek Slider Analog Input 1
PWM Voltage Jumpers on Sensor Shield Both set to VIN

Click to enlarge

b_500_500_16777215_00__images_tutorials_pantilt_pan-tilt-absolute_bb.png

pantiltdirectwiring.jpg

Project Code:

×

PC Control These demos and projects allow the robot to be controlled via a computer.

ArbotiX Commander Control - These demos and projects control the Robot using the ArbotiX Commander, the handheld Arduino based remote control.

Direct Control - These demos and projects control the Robot directly from sensors connected directly to the Robot's control board.

Pose Control - These demos and projects allow you to create and playback a sequence of poses.

Serial Control - These demos and projects control the robot using a serial packet protocol.

Standalone - These demos and projects are deisgned to let your robot function without a computer or additional microcontroller.

Wireless Control - These demos and projects allow you to control the robot wirelessly - usually by replacing the Serial Connection with XBee modules.

Reference - These articles have technical details regarding the control and operation of the robot.

×

More info here

Feedback Form